08-27-2016, 09:57 AM
Hello!
Here i will only list my settings for the motor control CVs:
NEW Atlas ALCO RSD-4 (the motor looks alike as one of these Mabuchi 180 Type, no cogging was perceptible when turning the motor by hand) :
CV10: BEMF cutout 0
CV 67: 1
CV 68: 3
Then a straight line to
CV94: 92
CV209: KP Coefficient 80
CV210: KI Coefficient 20
CV211: Low-Speed Compensation 20
CV212: BEMF Feedback Intensity 255 (100%)
CV213: BEMF Sample Period 9
CV214: BEMF Sample Aperture Time 15
CV215: BEMF Referece Voltage 150
CV216: Motor Speed Step Deadband 2
CV217: Motor Control Register 10
CV218: Analog Mode Motor Start Voltage
Please note, there are some differencies compared with the hitherto PID adjustings of Tsunamis before.
For further reading: <!-- m --><a class="postlink" href="http://www.soundtraxx.com/manuals/Econami_Diesel_Users_Guide.pdf">http://www.soundtraxx.com/manuals/Econa ... _Guide.pdf</a><!-- m -->
With these settings i got my Atlas RSD-4 to a mere crawling, setting in move without any jerks.
Greetings Lutz
Here i will only list my settings for the motor control CVs:
NEW Atlas ALCO RSD-4 (the motor looks alike as one of these Mabuchi 180 Type, no cogging was perceptible when turning the motor by hand) :
CV10: BEMF cutout 0
CV 67: 1
CV 68: 3
Then a straight line to
CV94: 92
CV209: KP Coefficient 80
CV210: KI Coefficient 20
CV211: Low-Speed Compensation 20
CV212: BEMF Feedback Intensity 255 (100%)
CV213: BEMF Sample Period 9
CV214: BEMF Sample Aperture Time 15
CV215: BEMF Referece Voltage 150
CV216: Motor Speed Step Deadband 2
CV217: Motor Control Register 10
CV218: Analog Mode Motor Start Voltage
Please note, there are some differencies compared with the hitherto PID adjustings of Tsunamis before.
For further reading: <!-- m --><a class="postlink" href="http://www.soundtraxx.com/manuals/Econami_Diesel_Users_Guide.pdf">http://www.soundtraxx.com/manuals/Econa ... _Guide.pdf</a><!-- m -->
With these settings i got my Atlas RSD-4 to a mere crawling, setting in move without any jerks.
Greetings Lutz