H0n3 modules - Printable Version +- (https://bigbluetrains.com) +-- Forum: Mainline (https://bigbluetrains.com/forumdisplay.php?fid=17) +--- Forum: Modular Modeling (https://bigbluetrains.com/forumdisplay.php?fid=23) +--- Thread: H0n3 modules (/showthread.php?tid=3558) |
H0n3 modules - WT fan - 12-19-2010 I need a 90 deg corner module. The frame is made from plywood, the core is foam and cork for roadbed. This module is made of two segments. Wolfgang Re: H0n3 modules - nachoman - 12-19-2010 nice job shaping the foam. What kind of tool are you using? Re: H0n3 modules - WT fan - 12-20-2010 For shaping the foam I've used a knife (such a type where you can chip the blade) as well as a rasp (together with the vacuum). Wolfgang Re: H0n3 modules - WT fan - 12-20-2010 Now I've added some type of tile adhesive to the foam. This works like plaster but is adhesive. It has still to dry. And i've glued PC board ties to the end plates. Wolfgang Re: H0n3 modules - WT fan - 12-28-2010 The two joker modules have now track. I've connected the two modules (5 deg and 10 deg curve modules) and glued PC board ties at the end plates. Then I laid track, ME code 55. Wolfgang Re: H0n3 modules - WT fan - 12-30-2010 Now some work "below" the modules. Wiring. Next step will be scenery, a start for next year. Wolfgang Re: H0n3 modules - Puddlejumper - 12-30-2010 WT fan Wrote:Wolfgang Why are these 2 modules so tiny? Re: H0n3 modules - WT fan - 12-30-2010 If you plan a layout for a certain room you must "get the curve". For the next meeting this layout looks lilke: or bigger http://www.westportterminal.de/meetings/2011UnnaFeb/layout.GIF These two modules have only 5 deg and 10 deg. If you incorporate such a module, the rest of the line will swing. The swing depends on the place where you put this tiny module. Wolfgang Re: H0n3 modules - Harry - 12-30-2010 Dave, I believe that these modules are available as modules for Fremo emergency meeting. Re: H0n3 modules - e-paw - 12-30-2010 What type of electrical connectors are those under the modules? Can you post a more detailed pic of them please? Re: H0n3 modules - WT fan - 12-31-2010 Here's a link to the dealer: http://www.conrad.de/ce/de/product/731315/BUeSCHELSTECKER-ROT-AXIALE-BUCHSE/SHOP_AREA_37528&promotionareaSearchDetail=005 and for the female ones http://www.conrad.de/ce/de/product/734047/EINBAUBUCHSE-BLAU-VOLLISOLIERT/SHOP_AREA_37528&promotionareaSearchDetail=005 Those are 4 mm connectors. Wolfgang Re: H0n3 modules - WT fan - 12-31-2010 Harry Wrote:Dave, Those modules are for my basement as well: A first try without those modules, with the current available ones: Wolfgang Re: H0n3 modules - WT fan - 01-26-2011 I've connected a few modules and have now a small layout. Here's a first video: Wolfgang |