Track inlaid in concrete question? - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Back Shop (https://bigbluetrains.com/forumdisplay.php?fid=52) +--- Forum: Tips and Tricks (https://bigbluetrains.com/forumdisplay.php?fid=30) +--- Thread: Track inlaid in concrete question? (/showthread.php?tid=5898) |
Track inlaid in concrete question? - jhock - 03-03-2013 Can any one help with a question about track that is inlaid in concrete? On my new layout I am building a siding for a lumber yard, the track is inlaid in concrete. Would wheel stops or bumpers be used on track like this? I have some Hayes wheels stops and Hayes bumpers, would either be used or would the track just stops? Re: Track inlaid in concrete question? - Chuck - 03-03-2013 It depends on what is at the end of the track and how much usage the spur track gets. If there is a building or a road/situation where a runaway car would cause damage or be a safety issue at the end of the track, then a Hayes bumper would be put in place. If there is nothing at the end of the track except a field, or nothing that could be damaged, then wheel stops would work. I have seen tracks on a long spur that have meandered off into weeds in the Detroit area. The used portion of the spur was near the main and the rest of the spur went a bit of a distance before being lost in the weeds. I am sure there are rules and reasons for the placement of bumpers and wheel stops. Hope this helps! Chuck Re: Track inlaid in concrete question? - jhock - 03-04-2013 Hi Chuck, It does help, directly behind the end of the spur will be one of the buildings of the lumber yard is it would make sense to use a bumper to prevent damage should a car roll free on the track. Thank you Chuck. So the next question is how do bumpers get used when the track in in concrete? Re: Track inlaid in concrete question? - Charlie B - 03-04-2013 Here are some pictures of a bumper that could be used. I made mine from wood and painted them to simulate concrete. I glued mine in place with hot glue. I groved mine to fit over the track. Using them with inbedded track you won't have to do that Charlie Re: Track inlaid in concrete question? - jhock - 03-04-2013 Thanks for the pictures, that does look like to would stop a rolling car! I might have to have a go at one of them and see what it looks like. Re: Track inlaid in concrete question? - Charlie B - 03-04-2013 The measurements are here <!-- m --><a class="postlink" href="http://prr.railfan.net/standards/standards.cgi?plan=70100-B">http://prr.railfan.net/standards/standa ... an=70100-B</a><!-- m --> you see they extend considerably into the ground, truly more than meets the eye. Charlie |