The Hobo Camp Fire Is going well #VI.. Stop In!!!

[Running Bear]

Good morning. It's 45° with 78% humidity. The high will 62° and feel like 67°.


Checked the hold of the Go2Glue I used yesterday to stick the SDFloppy ][ unit in place and it's holding very well. Why was that a concern? Yesterday I tried some thin Velcro. It's adhesive held to the SDFloppy just fine. However the stuff didn't like the somewhat textured surface of the ancient disk drive I stuck it on. Didn't matter how much I cleaned it or with what. The result was the same. It would slowly lose adhesion until it was just sitting there held by nothing more than gravity. When I touched it or tried removing the SD card the unit just came up Velcro and all. Oh well I wanted a flush fit anyway so off came the Velcro. I put just a small drop of the Go2Glue on the surface and pressed the unit down on it and it's still stuck there now. Works for me. I wonder how little of the Go2Glue would be needed to keep a diesel loco shell in place yet let it be easily removed. It doesn't stick your fingers together the way super glue does and it can be rubbed off if you rub hard enough. I've used it to make 'window glass' in a couple of old Zamac diesel bodies. I can tell you that it sticks to the Zamac VERY well. Putting it on is easy. Getting it off is another matter entirely!