01-25-2014, 07:52 AM
The buildings covered with Inkjet printed patterns got three layers of dull coat protection before they were integrated into the ground cover with mist, water and white glue. It worked fine on this wall
![[Image: IMG_3023_zps523762e2.jpg]](http://i966.photobucket.com/albums/ae149/faraway52/Misc-3/IMG_3023_zps523762e2.jpg)
and failed on this one
![[Image: IMG_3024_zpsa53618a1.jpg]](http://i966.photobucket.com/albums/ae149/faraway52/Misc-3/IMG_3024_zpsa53618a1.jpg)
The other problem is that the building should/must be removable. It resides where I grab the segment when it is moved. I intended to "break" it off the ground tomorrow when the glue has set as I do it other removable buildings made from pure styrene. The ruined Inkjet paint is a sign that the white glue is not stopped on top of the dull coat but got into the paper too. I am afraid there will be severe damage when I try to remove the building tomorrow.
![[Image: IMG_3025_zpsc88250b0.jpg]](http://i966.photobucket.com/albums/ae149/faraway52/FL2014-1/IMG_3025_zpsc88250b0.jpg)
and failed on this one
The other problem is that the building should/must be removable. It resides where I grab the segment when it is moved. I intended to "break" it off the ground tomorrow when the glue has set as I do it other removable buildings made from pure styrene. The ruined Inkjet paint is a sign that the white glue is not stopped on top of the dull coat but got into the paper too. I am afraid there will be severe damage when I try to remove the building tomorrow.
Reinhard