08-11-2009, 09:23 AM
Now you add the second bottom pc., and with the window sitting in place, add the two uppur pcs, butting them against the top of the window. Now we are back to where we were in the first pic, just keep repeating!
When the wall is done, laminate the brick sheet to the front of the wall. When dry, it is time to cut out the window openings in the brick sheet. Use a straightedge, as, for me at least, attempting to use the .020 styrene as an edge lets the blade wander sometimes. A few light passes will easily cut thru the .020 material. Use a sharp blade!
Here is the pic with the window out. A nice smooth opening.
When the wall is done, laminate the brick sheet to the front of the wall. When dry, it is time to cut out the window openings in the brick sheet. Use a straightedge, as, for me at least, attempting to use the .020 styrene as an edge lets the blade wander sometimes. A few light passes will easily cut thru the .020 material. Use a sharp blade!
Here is the pic with the window out. A nice smooth opening.