03-07-2010, 09:55 PM
Current Progress:
I've cut a new shelf to accommodate the increased depth of the latest plan, and printed the CADRail plan full scale for a test fit.
As it turned out, when I cut shelf's back edge to fit the wall (a Maple that used to be in the front yard had caused it to bow inward), I took about 1/2" too much wood off, so I'll have to shim it shelf out. Not a big deal at all, but I was pleased that the 1:1 plan showed my error immediately.
Before the cut
![[Image: p375473283-3.jpg]](http://goodman312.zenfolio.com/img/v9/p375473283-3.jpg)
Cut and mounted
![[Image: p324875281-4.jpg]](http://goodman312.zenfolio.com/img/v9/p324875281-4.jpg)
Full size image here:
<!-- m --><a class="postlink" href="http://goodman312.zenfolio.com/img/v9/p324875281.jpg">http://goodman312.zenfolio.com/img/v9/p324875281.jpg</a><!-- m -->
<edit, added pre-cut image>
I've cut a new shelf to accommodate the increased depth of the latest plan, and printed the CADRail plan full scale for a test fit.
As it turned out, when I cut shelf's back edge to fit the wall (a Maple that used to be in the front yard had caused it to bow inward), I took about 1/2" too much wood off, so I'll have to shim it shelf out. Not a big deal at all, but I was pleased that the 1:1 plan showed my error immediately.
Before the cut
Cut and mounted
Full size image here:
<!-- m --><a class="postlink" href="http://goodman312.zenfolio.com/img/v9/p324875281.jpg">http://goodman312.zenfolio.com/img/v9/p324875281.jpg</a><!-- m -->
<edit, added pre-cut image>
Matt Goodman
Columbus, Ohio
Columbus, Ohio