04-27-2010, 09:15 PM
Tom Wrote:What radius curve is going on that new piece Gary?
The curve on the outer edge of the benchwork is about 65" diameter at the peninsula (that's 30" of shelves on each side plus almost 5" for the wall) So, that's 32.5 inch radius on the outside. If I put the track 6 inches in from the edge, I can get a 26" radius curve. I'm okay with that, as I'll be running 4 axle diesels like the GP7, CF7, and GP30, plus mostly 40 foot cars. I dind't want to go any wider than 30" on the shelving because of the freestanding brackets.
Three Foot Rule In Effect At All Times