Lets build a camelback,, or two.

[e-paw]

I took advantage of the long weekend and got back to work on the 2-10-0's. I fitted the back heads to the fireboxes, and installed the lagging (styrene wrapper) over them. The rear shelters were also installed in place at the end of the fireboxes. I just placed the cabs in there approximate location for the photos, but the boiler bands are glued into place along with the sand domes. I am waiting for the body filler to harden up enough to sand on the locos, you can see some of it where the firebox wrapper joins the castings that I poured earlier. I have also cut a set of air tanks from brass and filled the ends with putty. There is also a set of steam domes the I have reworked from old Lee-Town castings that are waiting sanding, so that can be glued into place.    

    You'll also notice,at the bottom edge of the fireboxes, I have installed the ash pans.