Tour Ship

[doctorwayne]

I think that the railings, for the most part, would be easiest to build in-place. Use phosphor bronze wire (available from Tichy) and pre-tin it before installation. Install the vertical members first, then add the horizontal ones. You'll probably require fixtures to hold the verticals "vertical" and ones to allow for proper and constant spacing of the horizontal members, but both can be easily fabricated from softwood blocks. Add saw kerfs to accept and hold the wire while soldering. To protect nearby plastic parts and previously-made solder joints, the liberal use of wads of wet paper towelling should suffice.
If you're planning the add the mesh safety screen, check fabric shops for suitably-sized tulle, a veil-like material. It can be coloured with ordinary markers.

Wayne