03-18-2013, 12:54 PM
A little progress.
I got the steam supply pipe, and governor for the air compressor installed, and ran the steam exhaust line forward and up behind the stack.
I started forming the air "cooling coil", but I have to decide exactly where to put the expansion tank.
The coil is lying on the mat, just below the main engine cylinder.
I intend on using "Grain-of-rice" 1.5V bulbs, for the headlight, and back-up light. both castings have a white styrene insert, that has been shaped and drilled out, inserted in the casting, and the clear "glass" is in place. The bulbs will be inserted from the back of the lamp casting.
I got the steam supply pipe, and governor for the air compressor installed, and ran the steam exhaust line forward and up behind the stack.
I started forming the air "cooling coil", but I have to decide exactly where to put the expansion tank.
The coil is lying on the mat, just below the main engine cylinder.
I intend on using "Grain-of-rice" 1.5V bulbs, for the headlight, and back-up light. both castings have a white styrene insert, that has been shaped and drilled out, inserted in the casting, and the clear "glass" is in place. The bulbs will be inserted from the back of the lamp casting.
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!