11-11-2010, 12:02 AM
Glad you got it runnign again! Be glad it wasn't in 'disconnect' mode - that one is ever MORE aggravating, as the motor sounds will rev up, the horn and bell will work - but it won't turn a wheel! Great for simulating a load test I suppose. I can see why they put that stuff in there, but problem 1 is it remember that setting through a power off, so if you last shut it down then put it away for a month or so - who remembers they did all that shutdown rigamorole?
It's not just you - this is probably the most common 'problem' with locos using the QSI decoders. It's easy to get there accidently as you try to see what each sound is, but once it's totally shut down there is absolutely no clu that this is what's wrong, it just sits there dead.
--Randy
It's not just you - this is probably the most common 'problem' with locos using the QSI decoders. It's easy to get there accidently as you try to see what each sound is, but once it's totally shut down there is absolutely no clu that this is what's wrong, it just sits there dead.
--Randy
Modeling the Reading Railroad of the 1950's in HO
Visit my web site to see layout progress and other information:
http://www.readingeastpenn.com
Visit my web site to see layout progress and other information:
http://www.readingeastpenn.com