08-11-2012, 02:24 AM
HaH!--- Ya thought in couldn't spell bikini didn't ya? Or is that reference so dated that no one that can still walk without a cane or walker won't get it? Probably. Well here is what this post is really about.
One of the problems I have run into many times is not being able to find small enough screws to hold some model together.
finding any hardware much smaller than 00/90 is darn near impossible , not to mention EXPENSIVE ! 00/90's are about a buck each and the 000/120's I saw once were outrageous!!
There is a solution --- I bought this set a few years ago , but had not seen them for sale anywhere again till now. The set is on E Bay ---(-"Disclaimer"---- I got no dog in this fight --I am not selling it nor do I know the person who is. ---Ok thats out of the way . )
Take a look at what I am talking about . This set will both make internal and external threads as small as .7 mm-- thats about .020 !! The largest is 2 mm. thats about .078 --- all pretty small! They go up .1 mm at a time.
I have made little bitty nuts by drilling .062 brass , tapping it with the .7 mm and filing it into a a square or a hex configeration and cutting a it off the parent rod. I have also threaded .020 brass rod and by using one of the nuts I made soldered on the end made a little bitty bolt out of it! This kit is about 20 some odd bucks , I am sure happy to have mine -- take a gander , no hobby shop I have ever been in has anything like it.
<!-- m --><a class="postlink" href="http://www.ebay.com/itm/190572470531?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649">http://www.ebay.com/itm/190572470531?ss ... 1423.l2649</a><!-- m -->
One of the problems I have run into many times is not being able to find small enough screws to hold some model together.
finding any hardware much smaller than 00/90 is darn near impossible , not to mention EXPENSIVE ! 00/90's are about a buck each and the 000/120's I saw once were outrageous!!
There is a solution --- I bought this set a few years ago , but had not seen them for sale anywhere again till now. The set is on E Bay ---(-"Disclaimer"---- I got no dog in this fight --I am not selling it nor do I know the person who is. ---Ok thats out of the way . )
Take a look at what I am talking about . This set will both make internal and external threads as small as .7 mm-- thats about .020 !! The largest is 2 mm. thats about .078 --- all pretty small! They go up .1 mm at a time.
I have made little bitty nuts by drilling .062 brass , tapping it with the .7 mm and filing it into a a square or a hex configeration and cutting a it off the parent rod. I have also threaded .020 brass rod and by using one of the nuts I made soldered on the end made a little bitty bolt out of it! This kit is about 20 some odd bucks , I am sure happy to have mine -- take a gander , no hobby shop I have ever been in has anything like it.
<!-- m --><a class="postlink" href="http://www.ebay.com/itm/190572470531?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649">http://www.ebay.com/itm/190572470531?ss ... 1423.l2649</a><!-- m -->
Instant glue ? ---- SOLDER ---- NOW THATS INSTANT!