East Terminal & Newburgh

[Schraddel]

Hello,

the next part of the drama:

Looking for a quick (and not so dirty) solution for a removeable mounting for the light bars.
- a piece of aluminium tube, about 3cm, were set into predrilled bores in the deck plate
- a piece of round steel was inserted intn predrilled bores in the bottom end of the pillars
- inner diameter of tube and diameter of steel rounds are corresponding with some clearance




The second lightbar was completed.
What was confusig me is the height of the light bars. Here lenght of the pillars are 50cm. According to FREMO normature the upper edge of the head of rail has to be 130cm above ground. This is about 129cm upper edge of the ground plate and adding the 50cm of the pillar will result in a 179cm of the LEDs height above ground.


The part of the layout which is enlighted.


Lutz


On the highway deputy Buford T. Justice is able to ticket a too fast above the limit driver of a Corvette.