Help With Wireing Up Several Modules

[LynnB]

Well seeing as its going to be DCC its super easy , basicly your running the main DCC buss line from one module on to the next , I use 12 guage house wire for my main buss wire. So once you have the main buss below the module you just need to run feeders up through to the rails from the main buss. So each module will probably have its own main buss line and feeders so its then your choice how you connect from module buss line to module buss line, there are all kinds of ways to connect them like a terminal strip which may be overkill seeing as you will only have 2 buss wires unless you plan on running a seperate buss line for DC assesories like building lites and such or if you plan on using tortoise switch for turnouts, anyway you can then simply attach the DC and DCC buss lines to these terminals via a screw hold down.Hopefully this helps.