04-06-2015, 01:16 PM
That's why I said the right size bit.
If you want to be really sure, put some tubing that is an exact fit on the bolts and epoxy them in the holes.
Two pieces as long as the wood is thick and grease the bolts so you don't glue them.
Or you could wrap the bolts with Teflon pipe tape, put plastic steel epoxy on them and the holes, then shove them in the holes to make your own threads, no nuts required.
Masking tape or other barrier on the joint faces would ensure you don't glue the modules to each other.
Dan M.
If you want to be really sure, put some tubing that is an exact fit on the bolts and epoxy them in the holes.
Two pieces as long as the wood is thick and grease the bolts so you don't glue them.
Or you could wrap the bolts with Teflon pipe tape, put plastic steel epoxy on them and the holes, then shove them in the holes to make your own threads, no nuts required.
Masking tape or other barrier on the joint faces would ensure you don't glue the modules to each other.
Dan M.