06-16-2016, 07:05 AM
To avoid beginning an extra thread, i post it here.
Incandesdent bulbs vs LEDs.
On the zebra striped GP9 both bulbs are burning of course. But i am assured 100% the bulbs were branded with "Lucas".
The blue-yellow GP9 was just retrofitted with 2mm warm white LEDs and 1.2 Kohm resistors. There is an soldering spot marked with "14+" on the PCB (Tsunami) to which the "+" leg of the LEDs were connected.
Cheers Lutz
Incandesdent bulbs vs LEDs.
On the zebra striped GP9 both bulbs are burning of course. But i am assured 100% the bulbs were branded with "Lucas".
The blue-yellow GP9 was just retrofitted with 2mm warm white LEDs and 1.2 Kohm resistors. There is an soldering spot marked with "14+" on the PCB (Tsunami) to which the "+" leg of the LEDs were connected.
Cheers Lutz