Posts: 1,548
Threads: 99
Joined: Jan 2012
I've had my locos stored in their boxes , and in a sealed plastic tub for a number of years ....they haven't been run in atleast 5 years . I pulled out an Atlas switcher , Digitrax equipped , fired it up ....light came on immediately and I ran the loco back and forth , total about 20 feet . I noticed a burnt odor . Should this be alarming ? I haven't lubricated anything , yet .
Thanks , T
To err is human, to blame it on somebody else shows management potential.
Posts: 9,840
Threads: 234
Joined: Dec 2008
Was it an ozone type odor or the type you get when you let the smoke out? Sometimes when an electric motor sits they will have an ozone odor from brush arcing, but in any event I would tear it down and make sure everything is free, clean and lubed, and no wires anywhere they shouldn't be.
Charlie
Posts: 1,548
Threads: 99
Joined: Jan 2012
Charlie , I'm not sure what you mean about "ozone smell " , but it had a burnt metallic odor as opposed to smoke . I've never lubricated a loco ....heard lots of bad things about over-lubricating ....would I use a light oil or maybe a graphite material ?
T
To err is human, to blame it on somebody else shows management potential.
Posts: 9,840
Threads: 234
Joined: Dec 2008
Labelle 108 Is a light weight plastic compatible oil <!-- m --><a class="postlink" href="http://www.modeltrainstuff.com/Labelle-108-1-2-fl-oz-Multi-Purpose-Oil-Light-plas-p/lab-108.htm">http://www.modeltrainstuff.com/Labelle- ... ab-108.htm</a><!-- m -->
You only need to buy it once if you don't lose it or spill it.
I put it in an insulin syringe and you can really control the flow. a tiny tiny drop is all you need and these will reach most anywhere, just don't stick yourself.
(I also use them for applying lacquer thinner to polystyrene which I use for glue)
an Ozone smell is what you smell around an arc of electric.
Posts: 2,429
Threads: 63
Joined: Dec 2008
Ozone is the smell of old Lionel trains running.
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Posts: 9,840
Threads: 234
Joined: Dec 2008
BR60103 Wrote:Ozone is the smell of old Lionel trains running. Great description David. That old spark from the roller on the rail.
Charlie
Posts: 2,458
Threads: 57
Joined: Dec 2008
....and American Flyers....
Gus (LC&P).
Posts: 3,739
Threads: 44
Joined: Dec 2008
"Ozone is the smell of old Lionel trains running."
And sometimes new ones !
Mike
Sent from my pocket calculator using two tin cans and a string
Posts: 1,291
Threads: 64
Joined: May 2011
But they ran and ran.
Mike Kieran
Port Able Lines
" If the world were perfect, it wouldn't be " - Yogi Berra.
Posts: 1,548
Threads: 99
Joined: Jan 2012
Now that you mention it , my old 3 rail Marx did smell like that . I must have put a million laps on that puppy over the years . Ran perfectly .
Oh , I got my Spectrum , GE 44 ton out last night ....been stored a long time , ran great , no smell .....need to clean the track , though .
T
To err is human, to blame it on somebody else shows management potential.
If it keeps running, it's almost certainly not smoked, but you should lube it.
Posts: 1,548
Threads: 99
Joined: Jan 2012
I think I have some light oil in the trainroom ....somewhere . Maybe I'll luck out on it being OK to use .
T
To err is human, to blame it on somebody else shows management potential.
I would go ahead and stick with LaBelle 108, because light oil might damage any plastic gears or other parts.
Posts: 1,548
Threads: 99
Joined: Jan 2012
OK , boys and girls , what about Woodland Scenics HOB-E-LUBE ??? I've got it on hand ....."HL653" whatever that means ..." ultra light oil for small precision parts" ...." model railroad valve gear , motor bearings and wicks " ....and it sez , " safe for plastics and paints" . Ever used this stuff ???
T
To err is human, to blame it on somebody else shows management potential.
Posts: 9,840
Threads: 234
Joined: Dec 2008
TeeJay, I have never used it but if it is safe for plastics you are OK
Charlie
|