Thank you everyone.
I built the front and rear walls next:
I used photocopied cutouts of the plans the cut the board and batten walls out as well as the two front doors. The kit originaly has a large door in the rear but that won't work for the location that I'm using so I just left it out.
I then built the interior framing, much like I had built the side walls.
I added the large door frames.
Then I finished assembly by gluing the walls the the framing. The small door will be the access to the office which I'll be building soon.
After the main walls to the enginehouse were completed, I built the large doors.
The doors are built off the same photocopied plans using some scotch tape to hold things together as you glue. The main door panels are each made of 8 individual boards that you glue the framing to.
And the finished 2 sets of doors.
Next, the car shed wall and office.
I built the front and rear walls next:
I used photocopied cutouts of the plans the cut the board and batten walls out as well as the two front doors. The kit originaly has a large door in the rear but that won't work for the location that I'm using so I just left it out.
I then built the interior framing, much like I had built the side walls.
I added the large door frames.
Then I finished assembly by gluing the walls the the framing. The small door will be the access to the office which I'll be building soon.
After the main walls to the enginehouse were completed, I built the large doors.
The doors are built off the same photocopied plans using some scotch tape to hold things together as you glue. The main door panels are each made of 8 individual boards that you glue the framing to.
And the finished 2 sets of doors.
Next, the car shed wall and office.