I guess I am missing something as I can not get email notices of topics responded to. I guess I just don't see how to subscride to them.
Mike

PS I do get PMs

Here are a couple of pictures of the progress.
The shortened Atlas Roundhouse had to go as it was too wide with the 15deg angles.
I took a modern Walthers house (10deg.) and shortened both ends for a total length of 8" and then angled one wall of the Walthers Machine Shop and moved the smoke stack from the side to where you see the base now in the picture to decrease the over all width of both structures and I should now have room for some extra tracks off the table.
As you can see I need to do some more scenery removal to fit them.





Mike

Hi Guys - anybody mentioned adding a "<PREVIOUS/NEXT>" button at the bottom (and top) of the threads ? Thanks, Bob C.

I know it was insanely popular over at the old site (and much fun), would anyone be interested in doing that here?

If so, I'll start it off here. If not, Mods, just delete this post.

   

Here's an easy one to start us off: Western Pacific, a caboose, and number 430. There's 3 "easy's" to get us going.

I used this technique to make a river bank but it could be used anywhere you want to show rock stratta. the best part is that it is so EASY!! Materials needed: blue or pink foam, utility knife, paint. That's it.

First, carve the foam to the general shape you want:


Next use your knife to make horizontal slices in the foam. the more the merrier. After a while it will start to pull little pieces out (which is what you want) If the knife starts to "rip" the foam, change blades. It should look something like this:


I used a dark brown paint first on the recessed areas and then a lighter tan color to highlight the surface areas:


Other colors could be used like shades of gray:


You can also add sand, gravel,and greenery for a more finished look:


Finished scene:


Obviously there can be variations to the process....Sculptamold can be used here and there to blend it into the surroundings or cover the strata where ever you wish.

I hope you find this helpful

In the progress of building an HO coal line set around 1943/1953. I wanted to say HI to the other anthracite haulers out there.

I have a simple question for you all tonight, prior to reading this thread were you aware of the Rochelle (Illinois) Railroad Park? Feel free to add comments regarding, though that's not the purpose of this thread.

~BS

While we were setting up our new board, I neglected the Fantasy football League

Winner of each Semifinal advances to finals: "Bowl" game
Semifinals #1
1 LNE Fried eggs --
5 LSUChargers --

Semifinals #2
2 MIDNIGHTWONDERS --
3 Palouse Saints --

Consolation Games:
9Th Place
9 Baldwins --
10 THEMADTRAPPER --

10th Place
11 steelers1 --
12 Portage Volu... --

hi all


i have for sale 6 undecorated 100 ton undecorated bowser hopper car kits for sale in HO scale. they are brand new still sealed in the box. im asking $10.00 a piece for them, which is what i paid for them. if anyones interested let me know. thanks very much.


todd

Hello to all my old Gauge friends - some of whom I have run into on other forums. I had pretty much given up on the Zealot business, so it really is nice to see the REAL Gauge back again. I sure do hope that many of the older members who left will find their way back here as well.

As for me, I'm still modelling in On30, still have nothing really in a finished state, as I seem to jump from one project to the next...can anyone identify with this? My layout is a freelanced Northern Canadian narrow gauge line that fictionally links the Yukon and White Pass with a (never built) extension of the Dolly Varden Mines railway. I'm hoping to incorporate some Y&WP equipment here and there, as well as some of the "Megill River and Lighthorse Railway", who uses narrow gauge equipment purchased from many different and eclectic sources, as well as home-built whenever possible.

As mentioned, I will be off for about 6 months as I have been accepted for training with the Royal Canadian Mounted Police, and upon successful completion (fingers crossed!) of 6 months of training, will be enrolled as a member. I'm not too sure what kind of free time I will have during this period, but will try to check in here and there.