As requested I retook the photos and in better quality , I ended up forgetting about retaking them until someone told me the old pics are missing (I've been revamping my phtobucket)

The majority of the machine shop tools are from Greenway Products <!-- m --><a class="postlink" href="http://www.greenwayproducts.com/a_machine.shtml">http://www.greenwayproducts.com/a_machine.shtml</a><!-- m --> found at the local hobby shops around me.



If you copy the image location and post it in a new window it can be enlarged to actual size

I think there's another company but I don't remember them off hand, I'll edit when I remember.

this would make a great walkway bridge (from the LoC site HAER 292) called a Hadley Papabolic Bow ( leaticular truss) only three bridges were built in this comfigureation its 136" long and too wide for a foot bridge bur narrow it up to 6 or 8" and walla a master piece. And your just the guy to do and i dont think there will be too many on other layouts.
jim

Attached Files

Thumbnail(s)
   

The "Riding the Rails" - hobos stories...is on RIGHT NOW (8:00 PM) on PBS...
Check it out..!!

Hi everyone. I'm glad to be back.

I'd like to know how many freight cars can a single GP7 realistically pull?

Also, do you have advice for me who's having trouble with the tender of a Bachmann 4-8-4 from the Overland Limited derailing on a turnout?

I have an older DeVilbiss Aerograph Sprite airbrush from 1994 in great condition, which I haven't used in a long time, but like to again as I love it's action. (Aerograph is now chinese and quality is no longer quite the same...)
This airbrush has what seems NPT threaded connection, as does the hose. However, my new compressor has the now more common (in europe) 1/8"BSP size thread connection. Both are almost the same in size (approx 9mm in diameter) but the thread is a bit finer on the airbrush.
I am looking for an adapter (1/8"BSP female to NPT male ) to be able to connect the devillbis hose to this compressor, OR, to have a hose with devilbiss NPT on one side (the airbrush side) and a 1/8"bsp female size connector on the other.
Any ideas, suggestions on where I could get this? (I prefer shops in the UK as that's my location, but other shops that ship internationally (and can pay via Paypal) are also considered).

Thanks everyone for the help in advance!

Was wondering if anyone had thoughts on the following:

With Houston being the petroleum capitol of the nation, plastic pellets are a major commodity that is produced around here. I'm seeing that the manufacturers are producing product 24/7 and then loading the pellets in covered hoppers and sending them to storage yards. Then when a customer makes a request, the hoppers are taken from the storage yard and sent on their way. Instead of storing thousands of tons of pellets in silos, they are stored in the covered hoppers in a huge yard east of Houston.

I think this would be a great operation to model (of course at a drastically reduced scale)... and since I ended up with an extra yard from the old layout which was incorporated into the new layout, I think I found the perfect use for it. But instead of plastic pellets, I think I'll go with GERN granulated flux. So GERN produces the flux, loads it in empties, sends the empties to the storage yard, then the hoppers ship from there to fill customer needs.

Any thoughts on making this an operational success? Good points, bad points? Operating schemes?

Here is a GoogleEarth image of the huge yard I mentioned. Thousands of covered hoppers there!
   

Living up here New York State, anytime this state offers you something for free, you have to take it, right? Where I live, in the lake effect snowbelt, our local highway Dept. of Public Works, deposits a "good" amout of sand and dirt to our roads. I know this because every spring I need to clean up about a couple of pails of this stuff in front of my house.

Looking closely at the mixture this year, I noticed it was a very good mixture of sand, stone and fine grain dirt. It looks like it would make some great ground cover for a layout. Has anyone ever tried this before? If not, I have a few pails of it in the garage. If I get some zip-lock bags, maybe I can sell this stuff.

Being new to this forum, I'm sorry if this method was discussed before. I wanted to share a tip for a easy to build "scrap pile" for a junk yard. About a year ago, I attended a local train show. At one of the modular layouts, I noticed a great looking scrap yard (HO) packed into a corner of the layout. I asked one of the members about it and he was very happy to share his "how I did it" story with me.

It started when he took his vehicle in to be serviced for brakes at a local auto repair shop. He noticed one of the mechanics filing down some metal on a machine (filing brakes or rotars?). He looked at the shavings left on the floor and his light bulb went on. He asked the mechanic if he could take some of the shavings. He got all he wanted. He took them home and went to work. He built up 2 mockups (2 piles) out of styrofoam. He then "shaped them" into realistic piles. He then glued the shavings onto the mockups. Presto. 2 scrap piles. He then left them outside for a couple of days to "weather (rust)". The result was so realistic. He left the shavings outside as well to weather. He "sprinkled" these around the siding then added a crane and 2 gons and got himself a neat little siding.

Sorry to say, I did not take a picture so you will have to use your imagination. Someone mention "ones mans junk...."

The new summer structure challenge has been announce in the Contest forum.

If you haven't seen it yet, go to: http://www.the-gauge.net/forum/viewtopic...11&start=0 to see what it's all about.